_
Large Canal Lining Equipment
Large canals cover everything from large power channels and main canals to small distributary and secondary canals that run as small as approx. 2.5m (8 ft.) deep and 2.5m (8 ft.) bottom width. Depending on the size of the canal, the canal can be trimmed and lined in a single pass (Full Span) or in one or more passes (Half Span or a combination of Half Span and Flat Configuration). Whether a canal should be paved Full Span or Half Span depends on many factors such as canal bottom width, ground conditions, schedule, embankment width available at the top of the canal, etc.
Large Canal Lining Equipment
Trimmer Machines
Trimmer Machines _Trimmer Machines The trimmer spoils in a windrow away from the side of the canal that can be used for fill to avoid rehandling. The trimmer spoils directly into hauling trucks to haul away from cuts and to avoid rehandling. The trimmer spoils into other conveyors to discharge...
Large Canal Lining Equipment
Lining Machines
Lining Machines _Lining Machines Liner is available in a two, three, or four track configuration. The hydraulic jacking columns, crawler tracks, truss frame with slipform pan, power unit, and conveyor widths can be designed and sized to handle a wide range of canal sizes and / or target concrete or...
Large Canal Lining Equipment
Curing Machines
Curing Machines _Curing Machines The separate workbridge (or Jumbo) for finishing concrete and applying curing compound on the concrete surface. In addition to this, separate Jumbos are used for inserting preformed PVC transverse contraction joints and to assist in laying prefabricated reinforcing steel mats. Although Jumbos are available with rubber...